Ceramic Fiber Plus Blanket
Blanket with lower shot content and higher tensile strength for demanding linings and modules.
Industrial thermal insulation & refractory
Rosetexwool manufactures ceramic fiber, rock wool, calcium silicate and aerogel insulation — engineered to cut energy loss, protect personnel and extend equipment life across petrochemical, power, steel and cement.
Free sample + 24-hour engineering quote
Spec-match guarantee
Materials
Browse our full range of industrial insulation products, organised by material type.
Engineered industrial insulation trusted by petrochemical, power, and steel plants worldwide.
Blanket with lower shot content and higher tensile strength for demanding linings and modules.
Rigid calsil board to 1100 °C for furnace and kiln linings. High compressive strength.
Flexible rock wool blanket to 650 °C for tanks, large ducts and equipment. A1 non-combustible.
Basalt board to 650 °C. Fire-safe, water-repellent, for walls, roofs and oven casings.
Industries We Serve
Select your industry to discover insulation and refractory materials matched to your operating temperatures and performance requirements.
Steam, process and chilled lines from 650°C down to −120°C. Rock wool, calcium silicate, glass wool and aerogel, cut to your pipe schedule.
Boiler walls, HRSG casings, main steam lines and turbine covers, chosen for the 540–620°C steam cycle and the CUI band below it.
Deck fire barriers, engine-room piping and LPG tank protection to A-60 and H-60 divisions, with stainless jacketing for salt spray.
Receiver backing, molten-salt piping and storage tanks. Holds 565°C salt above its 238°C freeze point through the night.
Baghouses, ESP hoppers, SCR reactors and FGD ducts, lined to keep the steel above the acid dewpoint at low load.
Reformer furnaces, transfer lines, columns and exchangers. A1 rock wool and calcium silicate with chloride low enough for stainless.
Supply and return ducts sized to ASHRAE 90.1. Foil-faced mineral wool wrap, board and acoustic liner, with sealed seams.
Metal, flat and low-slope roofs, sized to ASHRAE 90.1 and IECC, with tested uplift resistance and A1 fire class.
External walls, fire compartments and acoustic partitions. Rock wool, glass wool and calcium silicate for U-value, Rw and A1 class.
Auxiliary piping, valve insulation and fire barriers for nuclear islands. Low-chloride rock wool and calcium silicate, seismically qualified.
Cargo fire barriers, engine firewall blankets and re-entry protection, qualified on backface temperature rather than a datasheet limit.
Tunnel linings, structural steel protection and cable shaft seals. Assemblies rated to EN 1366, ASTM E119 and the hydrocarbon curve.
Blast furnace stoves, hot blast mains, tundish covers and reheat furnaces. Ceramic fiber and IFB for 1,430°C service in reducing gas.
Retrofit insulation, furnace energy-saving coatings and fire-door cores. Mineral wool and calcium silicate for existing buildings.
Rotary kiln backing, preheater cyclones, clinker coolers and ducts. Calcium silicate and rock wool for alkaline, dust-laden service.
Cold stores, LNG transfer lines and liquid-nitrogen piping from −196°C, with closed-cell layers and a sealed vapour barrier.
Send us your specifications and we will recommend the right insulation system — fast.
Free sample + 24-hour engineering quote
Spec-match guarantee
How Rosetexwool relined a Middle East reformer furnace in 12 days with 1,200 ceramic fiber modules, achieving sub-65°C shell temps.
Read the case study
A microporous back-up layer is bounded on both sides. Worked multi-layer numbers, the interface-temperature trap, and the acceptance clauses that keep it inside its limit.
Read more →
A system-by-system guide to CSP insulation: why the receiver's insulation is a vacuum, why tank bases are load-bearing, and why low chloride beats low conductivity.
Read more →
A supplier-side guide to qualifying an industrial insulation supplier: what each document proves, where to verify it, what to check on arrival, and the PO clauses that make acceptance enforceable.
Read more →Rosetexwool manufactures ceramic fiber, rock wool, calcium silicate, microporous nano boards, and aerogel blanket insulation. Our products cover temperatures from ambient to 1900 °C and serve petrochemical, power generation, iron & steel, cement, fire protection, and environmental industries in 60+ countries.
Yes — we are ISO 9001:2015 certified. All our insulation products are 100% asbestos-free and comply with international standards including ASTM, API, NFPA, EN, and OSHA. We provide material test certificates with every shipment.
Standard ceramic fiber, rock wool, and calcium silicate products ship within 15–25 days from our 25,000㎡ Zhengzhou plant. Custom and large-volume orders may require additional lead time. We ship globally by sea and air with full export documentation.
Absolutely. Our engineers provide free material recommendations, thermal calculations, and CAD drawings within 24 hours. We manufacture custom densities, thicknesses, shapes, modules, and pipe sections to your specifications.
Contact us through our inquiry form, email, or WhatsApp. We provide free samples via DHL/FedEx and send detailed quotations including material specifications, pricing, and shipping options — typically within one business day.