Rosetexwool  Insulation Refractory Co., Ltd.
Industries We Serve

Insulation for 16 industrial applications

Pick your industry. We spec the material, thickness and fixing for its temperature, atmosphere and abrasion, then ship it with mill test certificates.

Factory-direct since 1982 25,000 m² plant in Zhengzhou ISO 9001:2015, cert. 0482024Q0183R2S Mill test certificates with every shipment

Industry Solutions

Rosetexwool has manufactured thermal insulation and refractory materials at its own plant since 1982, and exported them for 23 years. Each application page below carries its own temperature limits, material comparison and product list, so the spec can be written from the page rather than from a catalogue.

Our Industries at a Glance

16
Applications
60+
Countries Served
1900 °C
Max Service Temperature
27
Product Lines
Industry Solutions

All 16 applications

Pick the closest match. Every page lists the temperatures, material options and product forms for that duty.

Pipe Insulation

Steam, process and chilled lines from 650°C down to −120°C. Rock wool, calcium silicate, glass wool and aerogel, cut to your pipe schedule.

See Pipe Insulation

Power Generation

Boiler walls, HRSG casings, main steam lines and turbine covers, chosen for the 540–620°C steam cycle and the CUI band below it.

See Power Generation

Marine & Offshore

Deck fire barriers, engine-room piping and LPG tank protection to A-60 and H-60 divisions, with stainless jacketing for salt spray.

See Marine & Offshore

Concentrated Solar Power

Receiver backing, molten-salt piping and storage tanks. Holds 565°C salt above its 238°C freeze point through the night.

See Concentrated Solar Power

Environmental & Dust Removal

Baghouses, ESP hoppers, SCR reactors and FGD ducts, lined to keep the steel above the acid dewpoint at low load.

See Environmental & Dust Removal

Petrochemical

Reformer furnaces, transfer lines, columns and exchangers. A1 rock wool and calcium silicate with chloride low enough for stainless.

See Petrochemical

Duct Insulation

Supply and return ducts sized to ASHRAE 90.1. Foil-faced mineral wool wrap, board and acoustic liner, with sealed seams.

See Duct Insulation

Roof Insulation

Metal, flat and low-slope roofs, sized to ASHRAE 90.1 and IECC, with tested uplift resistance and A1 fire class.

See Roof Insulation

Building

External walls, fire compartments and acoustic partitions. Rock wool, glass wool and calcium silicate for U-value, Rw and A1 class.

See Building

Nuclear Power

Auxiliary piping, valve insulation and fire barriers for nuclear islands. Low-chloride rock wool and calcium silicate, seismically qualified.

See Nuclear Power

Aerospace & Defense

Cargo fire barriers, engine firewall blankets and re-entry protection, qualified on backface temperature rather than a datasheet limit.

See Aerospace & Defense

Traffic & Fire Protection

Tunnel linings, structural steel protection and cable shaft seals. Assemblies rated to EN 1366, ASTM E119 and the hydrocarbon curve.

See Traffic & Fire Protection

Iron & Steel

Blast furnace stoves, hot blast mains, tundish covers and reheat furnaces. Ceramic fiber and IFB for 1,430°C service in reducing gas.

See Iron & Steel

Green Building & Retrofit

Retrofit insulation, furnace energy-saving coatings and fire-door cores. Mineral wool and calcium silicate for existing buildings.

See Green Building & Retrofit

Cement

Rotary kiln backing, preheater cyclones, clinker coolers and ducts. Calcium silicate and rock wool for alkaline, dust-laden service.

See Cement

Cryogenic Insulation

Cold stores, LNG transfer lines and liquid-nitrogen piping from −196°C, with closed-cell layers and a sealed vapour barrier.

See Cryogenic Insulation

Need a quote for your project?

Send us your specifications and we will recommend the right insulation system — fast.

or email us directly
Support

Frequently asked questions

What is the best insulation material for high-temperature industrial applications? +
The ideal material depends on your maximum operating temperature and environment. Ceramic fiber blankets and modules perform best between 1100°C and 1430°C for furnace linings, expansion joints, and reformer applications. Calcium silicate boards withstand up to 1100°C with high compressive strength for pipe and equipment insulation. Rock wool is cost-effective up to 650°C for general plant insulation. For space-constrained applications, microporous and nano aerogel boards provide the thinnest insulation at temperatures up to 1000°C. Contact our engineers with your operating data for a specific material recommendation.
Can you supply insulation for the petrochemical and refinery sector? +
Yes. Rosetexwool is a trusted supplier to the petrochemical industry. Our ceramic fiber blankets, boards, and modules are specified for reformer furnaces, ethylene cracking units, FCCU regenerators, and process heaters. We also supply calcium silicate for high-temperature pipe insulation (steam tracing, transfer lines) and rock wool for tank insulation and fireproofing. All products meet ASTM, EN, and ISO standards with full material certification.
Do you provide insulation solutions for power plants? +
We serve coal-fired, gas turbine, combined cycle, and nuclear power stations with: boiler wall ceramic fiber modules, HRSG casing rock wool blanket, main steam pipe calcium silicate sections, removable turbine insulation pads, SCR and FGD system insulation, and district heating pipe sections. Our pre-fabricated modules and blankets speed up installation during planned outages.
What insulation systems do you recommend for the steel industry? +
For iron and steelmaking, we recommend: ceramic fiber modules with IFB backup for hot blast stove domes and combustion chambers (up to 1350°C), vacuum-formed ceramic fiber shapes for tundish covers and ladle pre-heating lids, ceramic fiber blanket for reheat furnace linings, and calcium silicate/rock wool for plant-wide pipe and ductwork insulation. We also supply custom shapes for unique steelmaking equipment.
Can you provide custom-cut insulation shapes and sizes? +
Yes. We manufacture custom dimensions across all product categories: ceramic fiber vacuum-formed special shapes, precision-cut calcium silicate boards and pipe sections, custom-sized rock wool blankets and wired mats, and bespoke microporous boards. Provide your drawings or dimensions — we cut to ±1mm tolerance where required. Custom shapes typically ship within 2-4 weeks depending on complexity.
Request a Quote WhatsApp

Get in touch

Free consultation & tailored quotation

Request a Quote WhatsApp