Stay Updated

News & Insights from Rosetexwool

Company announcements, application case studies, and industry insights.

Industry Insight Oct 16, 2026

Fiberglass Pipe Insulation: R-Value, Types, Thickness and Cost (2026 Guide)

Fiberglass pipe insulation R-values by thickness and pipe size, half-shell types and facings, 250–400 °C service limits, ASTM C547 data and commercial cost drivers — one specification guide.

Industry Insight Oct 16, 2026

Cost of Fiberglass Insulation in 2026: per Sq Ft, Batt, Blown-In

Fiberglass insulation cost in 2026: USD 0.55-1.05/sq ft material, 0.85-2.00 installed batts, 1.00-2.10 blown-in, R-49 attic math, vs rock wool and foam, and a 10-point quote checklist.

Industry Insight Oct 16, 2026

Aerogel Insulation Cost and Price 2026: Blanket Guide | Rosetexwool

Aerogel insulation cost in 2026: blanket prices near USD 22/m² market average, USD 20-40/m² for 6-10 mm grades, why the 5-10x premium narrows to 2-4x per R-value, and when aerogel pays back.

Industry Insight Oct 13, 2026

Calcium Silicate vs Rock Wool Insulation: Which to Specify?

Calcium silicate vs rock wool compared by product grade, temperature, conductivity, fire, mechanics, moisture and life-cycle cost — ending in a condition-based selection matrix.

Industry Insight Oct 13, 2026

Fire Rated Duct Insulation: What Actually Carries the Rating?

Fire rated duct insulation explained: the five ratings behind one term, honest temperature limits for rock wool, glass wool, ceramic fiber and calcium silicate, and how to choose.

Industry Insight Oct 12, 2026

Aircraft Thermal Insulation for Nacelles and Equipment Bays

Aircraft thermal and acoustic insulation for engine nacelles and equipment bays: how material families map to duty zones, why airworthiness rules differ by location, and a practical selection matrix.

Industry Insight Oct 12, 2026

Space Launch and Reentry Thermal Protection Materials

Space launch and reentry thermal protection materials explained by mission phase: the evidence ladder from industrial blanket to flight-proven TPS, and why ablation, not insulation, owns the hot face.

Industry Insight Oct 11, 2026

Nuclear Power Plant Insulation: Materials, Standards and Selection

Nuclear power plant insulation as a system decision: duty zones, candidate materials, stainless steel compatibility, passive fire protection and a practical selection matrix.

Industry Insight Oct 10, 2026

Cryogenic Tank Insulation for LNG: Materials and Boil-Off Control

How cryogenic tank insulation works for LNG at -162 °C: three-zone onshore stacks, membrane and vacuum systems, material behavior, failure modes and a selection matrix.

Industry Insight Oct 9, 2026

Calcium Silicate Pipe Insulation: Selection, Thickness and Standards

Calcium silicate pipe insulation explained: xonotlite vs tobermorite grades, conductivity at real mean temperatures, thickness design, and the ASTM C533/C795 compliance checklist.

Industry Insight Oct 3, 2026

Propulsion Thermal Management Materials: Nozzles, Throats and Hot Walls

How propulsion thermal management works: gas-side temperatures, ablative and CMC nozzles, regeneratively cooled walls and the back-insulation that protects structures behind them.

Industry Insight Oct 2, 2026

Aerospace Sensor High Temperature Thermal Insulation: Gradient Design from Probe to Electronics

Component-level guide to aerospace sensor insulation: controlled gradients from hot probes to cool electronics, lead-wire heat-leak control and dielectric material selection.