News & Insights

Page 3 — company announcements, application case studies, and industry insights.

$Refractory Board Selection: Calcium Silicate vs Ceramic Fiber Board for Furnace Linings$

Industry Insight Sep 11, 2026

Refractory Board Selection: Calcium Silicate vs Ceramic Fiber Board for Furnace Linings

How to choose refractory board for a furnace lining: hot face or back-up duty, batch or continuous cycling, gas velocity, slag and alkali exposure.

Industry Insight Sep 10, 2026

Euroclass Fire Classification for Industrial Insulation: A1 to F, Smoke and Droplet Levels Explained

The Euroclass system explained for industrial insulation — the seven main classes from A1 to F, the s1-s3 smoke and d0-d2 droplet suffixes, and the EN 13501-1 test methods behind them.

Industry Insight Sep 9, 2026

Glass Wool Insulation Buyer's Guide 2026: Supplier, Density and Specification Selection

Supplier audit, formaldehyde-free selection, density selection and an enquiry checklist — the four decisions that settle an industrial glass wool insulation purchase.

Industry Insight Sep 9, 2026

Petrochemical Plant Insulation: Materials, Selection and Standards by Process Unit

A unit-by-unit guide to petrochemical plant insulation — distillation, cracking, storage and heat-traced lines — with the temperature bands and corrosion regimes that decide material selection.

Industry Insight Sep 8, 2026

Nano & Microporous Insulation: Ultra-Thin High-Performance for Industrial Service

Nano microporous board delivers 0.016–0.030 W/(m·K) at up to 650 °C, cutting insulation thickness 50–70 %: how the pore structure works, ISO 18959:2025 classes, and the seven checks before you buy.

Industry Insight Sep 8, 2026

Nano vs Aerogel vs Microporous: Choosing the Right Ultra-Thin Insulation

Aerogel leads at room temperature at 0.013–0.021 W/(m·K), microporous board wins above 600 °C at 0.030–0.038. Where each one pays back — and where each one fails.

Industry Insight Sep 7, 2026

Rock Wool Pipe Production: How Rock Wool Pipe Sections Are Made

Rock wool pipe production flow: raw basalt, melt at 1500–1600 °C, centrifugal fiberization, three-dimensional forming, curing, and cutting — and what to verify when sourcing a producer.

Industry Insight Sep 7, 2026

Rock Wool Pipe Insulation: Specs, Production & Selection

Rock wool pipe insulation: spec, production and supplier qualification for industrial pipework up to 750 °C, Class A1 non-combustible, with hydrophobic options for wet service.

Industry Insight Sep 6, 2026

Polycrystalline Fiber Modules: Spec, Installation & Applications

Polycrystalline fiber modules handle 1400–1700 °C service, shrink less than 3 %, and outlast standard ceramic-fiber modules in severe hot-face duty.

Industry Insight Sep 6, 2026

Insulation Glossary: A1, Calsil, Pyrogel, Microporous Explained

Plain-English definitions of four key industrial insulation terms: A1 fire rating, Calsil calcium silicate, Pyrogel aerogel, and microporous insulation — plus a comparison table and selection guide.

Industry Insight Sep 6, 2026

Pyrogel vs Mineral Wool Pipe Insulation: Real Comparison

Pyrogel vs mineral wool pipe insulation: thermal conductivity, thickness, CUI risk, installed cost, and real payback data for steam and process lines.

$Refractory Insulation Materials: Types, Ratings & Applications$

Industry Insight Sep 6, 2026

Refractory Insulation Materials: Types, Ratings & Applications

Refractory insulation materials explained: ceramic fiber, PCW, calcium silicate, rock wool and microporous grades compared by rating, conductivity and applications.